Duplex Digital Water Pump Control Box
Working pump :0.75-15kw
Plastic enclosure:IP 65
MCB/AC Contactor:CHNT
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
PCH32 Plus it is Duplex digital water pump control box
This controller it working in 3 Phase 220v/380v/415v
Working pump :0.75-15kw
Plastic enclosure:IP 65
MCB/AC Contactor:CHNT

Main technical data
Start type: DOL (Direct on line)
Qty of controlled pump: single pump control
Support external sensing devices:
Float switch (ON/OFF)
Pressure switch(ON/OFF)
Liquid probe
0.5-4.5V Level Transmitter / Pressure transmitter (model PCH 32 only)
4-20mALevel Transmitter / Pressure transmitter (model PCH 32 Plus only)

Protection
| Item | Protection | Value | Remark | Fault type |
| 1 | Dry Run protection trip ampere | 75% of Calibrated running ampere | In menu setting | Recovery fault |
| 2 | Dry Run protection trip response time | 5s | In menu setting | |
| 3 | Dry Run protection recovery time | 45m | In menu setting | |
| 4 | Over Load protection trip ampere | 130% Calibrated running ampere | In menu setting | Recovery fault |
| 5 | Over Load protection trip respone time | 5S(inverse time ) | fixed in software | |
| 6 | Overload protection recovery time | 4m | In menu setting | |
| 7 | Pump Stalled protection trip ampere | 180% of Calibrated running ampere | In menu setting | Unrecovery fault |
| 8 | Pump Stalled protection trip respone time | 1s | fixed in software | |
| 9 | Under Voltage protection trip voltage | 304v | In menu setting | Recovery fault |
| 10 | Under Voltage protection trip respone time | 6s | fixed in software | |
| 11 | Under Voltage protection recovery time | 4m | In menu setting | |
| 12 | Over Voltage protection trip voltage | 437v | In menu setting | Recovery fault |
| 13 | Over Voltage protection trip respone time | 6s | fixed in software | |
| 14 | Over Voltage protection recovery time | 4m | In menu setting | |
| 15 | Open phase | Unrecovery fault | ||
| 16 | Phase reverse | Unrecovery fault | ||
| 17 | Overflow | Recovery fault | ||
| 18 | Over temp | Recovery fault | ||
| 19 | Water leakage | Unrecovery fault |
The extra advantage:
1. There are two dry contact point for signal output .
2. There are two teams over temp ports .
3. There are two teams water leakage ports .
4. There is 4-20mA analog signal port for connection with universal transmitter
5. On PCB Backside ,defining single phase or three phase by different point to point connection ,or by 1 p DIP switch setting .
Our Quality Control (QC) Profile
Maintaining consistently high-quality standards is our top priority. To achieve this, we have established a dedicated Quality Control (QC) and Quality Assurance (QA) department. All procedural documents and work instructions are strictly followed in accordance with ISO standards and customer requirements.
Quality Process Control:
1. **Pre-Manufacturing Verification:** Prior to manufacturing, the QC team verifies raw materials against the Bill of Materials (BOM) to ensure compliance with specifications, dimensions, and models. The team also confirms that the Work Instruction (WI) aligns with the customer order and inspects production instruments and fixtures, such as the temperature of electric soldering irons and the torque of pneumatic screwdrivers. These inspections are documented on corresponding report forms.
2. **First Article Inspection (FAI):** The QC team conducts a detailed inspection of the first finished or semi-finished product produced during the current order cycle. This verification is performed against the BOM and WI, and the results are recorded in the FAI report for approval by the management team.
3. **In-Process Quality Checks:** The QC team performs hourly inspections of semi-finished and finished products at a rate of 5 pieces per hour. If any abnormalities are detected, the team promptly requests a production line stoppage and reports the issue to the management team for further action.
4. **Final Quality Assurance (FQA):** The QA team conducts comprehensive inspections of the finished products' appearance and performance based on the order requirements. These inspections are meticulously documented in the QA test report.
Hot Tags: duplex digital water pump control box, China duplex digital water pump control box manufacturers, suppliers, factory, Digital Well Pump Controller, Subersible Three Phase Pump Control Box, Submersible Pump Starter Panel, Sewage Lift Station Control Panels, Intelligent Single Pump Controller, Three Phase Submersible Pump Control Panel







