2 Pump Controller

When two pumps must switch in order to give each an equal amount of operating time, the Series PCH 2 PUMP CONTROLLER is employed. The equal wear on both pumps made possible by alternating loads extends the operational life of the pumps.

 

 

Both residential and commercial building sewage as well as the sewage from kitchens and toilets are lifted and treated by the professional sewer pump 2 pump controller. It is made with a high safety factor and a small, compact structure. Its ability to intervene quickly in the event of a malfunction or threat makes it simple to use and operate.

 

Its LCD display makes it easy to comprehend how the pump is working and the water level at this moment. The pump's operation is intended to be balanced. Pump A starts to run the first time, and Pump B starts to run the second time. The pump also contains an anti-rust feature to keep it from rusting if it is not used for a lengthy period. It will activate the dual pump and emit an alert in the case of an overflow.

 

The smooth running of residential and commercial systems is ensured by this inventive and dependable sewage lift controller. It is a necessary component of every residential and commercial structure to maintain effective and hygienic sewage treatment. Let's welcome technological progress in the interest of a healthier and more pristine environment.

 

Main technical characteristic
Control characteristic	double liquid level control
	pressure control
Control method	Manual / Auto
Liquid level control characteristic	pulse electrode probe & float switch
Pressure control characteristic	pressure switch (n/c) & pressure tank
Main technical data
Rated output power	refer to the nameplate
Rated input voltage	refer to the nameplate
Trip response time of over load	5sec-5min
Trip response time of open phase	＜2sec
Trip response time of short circuit	＜0.1sec
Trip response time of under / over voltage	＜5sec
Trip response time of dry run	6sec
Recovery time of over load	4min
Recovery time of under / over voltage/three phase unbalance	4min
Recovery time of dry run	45min
Trip voltage of over voltage	115% of rated input voltage
Trip voltage of under voltage	80% of rated input voltage
Liquid level transfer distance	≤1000m
Main installation data
Working temperature	-25℃ -- +55℃
Working humidity	20% - 90%RH
Degree of protection	IP54
Install position	Vertical
Unit dimensions ( L x W x H)	342*292*119mm
Unit weight (net)	2.8kg
RS485 technical data
Physics Interface	RS485 Bus Interface: asynchronism semiduplex
Baud rate	1200 bps,2400 bps,4800 bps,9600bps Default: 9600bps
Protocol type	MODBUS Protocol (RTU)

 

Brand: OEM

Manufacturer Model no:

Type:Duplex Alternating Control Panel

Rated Voltage:120/208/240V/380V/415V AC

Amps:9 to 32 A

Compatible Pump Type:Sump/booster/borehole pump

Number of Pumps Controlled:2

Location:Indoor/Outdoor

Enclosure Type :IP65

Enclosure size:342*292*119mm

 

Every protection feature is independently able to be enabled or disabled.

Pump last five fault history is shown.

Displaying the cumulative running time of the pump

Press the lock and unlock (adjustable) key button.

Information about pump functioning is shown on a dynamic LCD.

Memory Function during power-off and power-backup.

A/B pump action can be turned on or off.

Time settable for the pump start delay.Time settable for the delay in pump stop.

long signal transmission range (maximum of 1500 meters).

RS485 port for communication.

Currently available DC24V visual and auditory alarm (model PCH 32 Plus only).

To keep the pump and controller operating at their peak efficiency, a parameter menu is accessible.

LCD module provides comfortable human-machine interface.

Every electronic component is stable and dependable, and the product quality is stable as well.

Hot Tags: 2 pump controller, China 2 pump controller manufacturers, suppliers, factory, Motor Protector, Single Phase Submersible Control Panel, Electronic Pressure Control, 3 Phase Pump Control Panel, Intelligent Single Pump Controller, Single Phase Motor Protector Box