Precautions For Water Pump Use

1. If the water pump has any small faults, remember not to let it work. If the packing of the water pump shaft is worn out, it should be added in time, if the water pump continues to be used, it will leak. The direct effect of this is that the energy consumption of the motor will increase and the impeller will be damaged.
2. If the water pump vibrates strongly during use, you must stop and check the reason, otherwise it will also cause damage to the water pump.
3. When the bottom valve of the water pump leaks, some people will fill it with dry soil into the inlet pipe of the water pump, and then flush the bottom valve with water, which is really not advisable. Because when the dry soil is put into the water inlet pipe and the water pump starts to work, the dry soil will enter the pump, which will damage the pump impeller and bearing, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced with a new one.
4. Pay attention to the maintenance of the water pump after use. For example, when the water pump is used up, the water in the water pump should be cleaned. It is best to remove the water pipe and rinse it with clean water.
5. The tape on the water pump should also be removed, then rinse it with water and dry it in the light. Do not put the tape in a dark and humid place. The tape of the water pump must not be stained with oil, let alone paint some sticky things on the tape.
6. Carefully check whether there are cracks on the impeller and whether the impeller is loose on the bearing. If there are cracks and looseness, it must be repaired in time. If there is mud on the impeller of the pump, it should also be cleaned.